Page 60 - TEXtalks International July/August 2022
P. 60

gives us the opportunity to add value to our yarns while using existing equipment.”

       60                                                                                                                                                  Fig. 3: Otabek Nishanov, CEO of FGT, is satisfied with COMPACTeasy: “The compacting device
            Due to non-contact spray application problems like   In DENIM the system is focussing on slasher
            tailing, Center–Side variation, substantivity etc. are   applications like Effect-Dyeing, Color-Denim,
            not existing. No tailing at the beginning of dye sets or   bottoming, topping or cold sizing. In fabric stage of
            after stops. Get an easy-to-operate and stable    DENIM it is used in PAd-Steam or stenter frame lines
            production with less fabric, dyestuff, chemical and   to realize single side overdyeing,shade corrections,
            energy waste.                                     resin and flat finishing.

            The system gives you the opportunity of fast color or   There is still time to act to significantly reduce your
            shade changes without long machine down times.    gas or oil consumption!
                                                              The current outlook for the coming months with
            In some dye classes a separation from dye bath and   regard to getting enough gas and the gas price
            chemical bath without intermediate drying is an   development is not positive and causes great
            additional big step forward. For example in terms of a   concern among many textile manufacturers around
            classical Pad-Dry-Pad-Steam-washing range you     the globe.
            easily eliminate 100% the first drying section and
            create our well known PS²-process (Pad-Spray- Steam)   Use the WEKO minimal spray application technology
            for Reactive and VAT dyes. In addition the salt usage in   in your dyeing and finishing process. As an example,
            light to medium shades is eliminated and in medium   the energy requirement for drying in a stenter frame
            to dark shades strongly reduced which has a big   can be reduced by up to 80%. Talk to our experts
            advantage in your wastewater treatment and costing.  about the large variety of applications.


 Yarn and fabric dyeing with RotaSpray  Several Dye classes could be used such as Reactive,
 For Dyeing a special, robust and extremely   VAT, Sulphur, Pigment, Direct and Indigo on yarn
 homogenous Rotor-spray system was developed and   sheet or in fabric stage. The system enables you to
 launched - the RotaDyer series.  produce cost-efficient small lots of even 200 meters.
        German Review














 Weitmann & Konrad GmbH & Co. KG founded in   Instead of 60-130% pick-up in padding WEKO could
 1953 has been developing and producing   work with 12-35% pick-up only. A huge saving in
 non-contact application systems for product   drying energy, water and chemistry is the result as
 optimization and surface finishing with different   well as higher speed.
 types of liquids and powdery substances offering
 revolutionary technology to combine a more   Also single side application is possible when needed
 sustainable process with cost-saving production.  and adjusting the penetration level to fabric.

 In addition, WEKO took over RotaSpray GmbH in   Therefore application and penetration is done only
 2021 and fully integrated this Rotor-Spray Dyeing   when needed. Most of the finishing applications are
 Technology into their portfolio.  needed purely on the top surface with very less
 penetration e.g. in hydrophobic, soil repellent,
 Textile finishing with WEKO  hydrophilic, softening, color fixation.
 Whether you apply softening, EasyCare, sewability
 improvement, water- or soil repellent, flame retardant,   The customer can use the systems in knit or woven
 color fixing, anti-microbial or hydrophilic agents - the   applications with wet or dry fabric processing on a
 use of auxiliary and the necessary drying energy is   very wide range of fiber types. An integration into
 significantly reduced by the exact pick-up control due   existing lines like stenter frames, Pad-Steam or
 to forced spray application.  Coating lines is very easy to do.


               July/August 2022
   55   56   57   58   59   60   61   62   63   64   65