Page 21 - TEXtalks. November-December 2022

20 21
Insulation: The whole structure is suitably insulated steps and jerks. This solves the problem of
with insulating panels, painted metal, and thick rock "Copy/rubbing" of the printed fabric and this
Cover Story Cover Story Continues movement of Chain: In GeySer there’s new loop formation system.
wool. This enables proper energy efficiency
continuous movement of the Chain is achieved
for the process.
without adding any moving parts or motors into the

Controlled Rotation of sticks: In GeySer the variables
mode of chin movement is introduced. In this new
rotation of sticks complements the continuous
mode the chain can run continuously without taking

Pentek’s patented technology

A cost-effective and

sustainable solution

Pentek Team at the Production Plant in Italy
printed fabrics in the standard configuration. dyestuffs and ii) Improve the color development in
case of a particular tone of colors (like cian) which
Option for Customization requires a higher oxidation value (particularly on
GeySer line embraces a wide range of models and digital printing dyestuff). Fresh air can be thus
variables of configuration, depending on the fabric digitally controlled through the touch screen panel, in
content, working width, and the selected heating the percentage of the amount of steam flow.
system to overheat the steam or heat the air. GeySer
is available within a range of fabric content and Easy Maintenance: Two movable platforms (one per
different working widths. The content varies from 140 door), sliding along the machine, enables one to components. Which means, the availability of For countries like Pakistan, where the energy cost is
meters up to 500 meters, increasing by 40 meters of reach any side of the chamber for any maintenance Technical support, spare parts and possibility of skyrocketing, such energy-efficient and low chemical
content at each step. The working widths available operation. The two platforms can be joined together upgradation will not be an issue anymore. consumption machines are very useful to win
are 2200 x 2000, 2600 x 2400, and 3600 x 3400. The to form a wider base, but during the process, they are the cost battle.
Pentek GEYSER Steamer machines enable several alternative configurations blocked on the two extremities of the steaming Larger inlet Hood: To avoid the thermal shock on the
and a wide range of customized solutions, including: chamber (in and out) in correspondence to the entry fabric, the larger inlet hood is introduced in GeySer Furthermore, the higher fabric content in the GeySer
• Multiple Entry Hood doors.
PENTEK Textile Machinery is an Italian company that steamers for the textile industry. • Pulse Steam Jet which slowly heats the fabric before entering the is given by the loop formation, the improved air
designs, manufactures, and sells textile equipments • Ir Heating Device Steaming Modularity: GeySer is available in 2 chamber. circulation fans and their placement within the various
and technologies in the preparation and finishing Steamers and curing machines are important for the • Winder On Exit steaming modularities. chambers, the fresh air inlet system, and the
segments. PENTEK started its operations in 2000. textile printing industries regarding the fixation of • Siemens Remote Monitoring And Recipes i) Intensive steaming: (260 cm module) with double movement of Chain, resulting in the jerk free maintenance jobs, there are two moveable platforms Loop Formation: GeySer has a unique and innovative innovative multiple entries are only some of the major
Initially dedicated to niche sectors, such as dyestuff. However, steaming and curing machines are • Front Plaiter Alternative steaming units, symmetrically placed one before the transportation of fabric. Which eliminates the inside the chamber of GeySer which can slide design for loop formation, which implies a lifting of factors for reaching and maintaining a constant
discontinuous rope tumblers and wool finishing used for cellulosic and polyester fabrics, respectively. • Unrolling And Stocking Unit other for maximum intensity, and it has been common problem of "Copy/ rubbing" wherever the maintenance work is required. the loop after the feeding roller strike by a stick in a temperature and steam quality during the entire
machinery, PENTEK goes beyond the logic of the Similarly, for pigment printing, the curing method is designed for the first steaming action. clockwise motion that follows the direction of the process and provide the best possible color
single machine and proposes process technology used. A printing industry, therefore, needs to have The key advantages of the GeySer for the printing ii) Extended steaming: (390 cm module) for bigger Variable Air intake system: In GeySer, instead of Automation for valves: All of the valves in GeySer are sticks. With this new concept, the fabric falls in a development. Savings in operation are related not
solutions that involve a combination of machinery and multiple machines and costs associated with these sector include: fabric content, composed of the same double fixed air dampers, there's variable Air intake system controlled by the Main panel so the operator doesn’t natural way minimizing the slipping or oscillation of only to the steam ager alone and the process before
continuous process logic. Continuing its legacy, for smooth processing. In comparison, GeySer is Fresh Air Mix: Fresh air inlet is more and more steaming units, but placed in front of the other, but that provides more control of air inside the chamber have to go to valves after changing the process. the loops. On the other hand, in conventional and after the steaming step, from the lesser need to
Pentek has introduced a steamer named “GeySer” suitable for all types of steaming and curing required to fulfill the double task, i.e., I) Lower the not symmetrically, to enable uniform distribution of to eventually achieve desired results on the fabric. systems, the load is on the pins during the loop utilize urea in the printing paste to the less water and
which is the result of a working team of engineers of applications currently available in the textile printing temperature together with the atomized water to face the steam. This one has been indicated for bigger Totally Siemens-based electrical panel: The electrical formation, which are the weak points of sticks. chemical consumptions during washing after fabric
Pentek and Kromatica and technologists with more industry. GeySer already includes the possibility to the natural exothermic phenomenon of reactive fabric content. Moveable platforms inside chamber: To facilitate the panel of GeySer is totally equipped with Siemens Therefore, GeySer has fewer breakage and steaming, whenever it applies. Thus, GeySer by
than 30 years of experience in the segment of process traditionally printed or digitally maintenance requirements making it a robust system. Pentek is a win-win combination.
November/December 2022 November/December 2022