Page 58 - November-December-2017

58
SWISS-MADE IS PLUS-MADE.

REVOFIX WET forms a film around the fibre - Finishing
preventing thus the abrasion of fibre/dye. - Moisture when rubbing

The fastness to light, washing and contact of the The examinations have shown that poor rubbing
treated textiles are not impaired and the shade fastnesses are not only caused by abraded dye, but
intensification is tolerable. The handle of the fabric is also by abraded fibre material, especially from
hardly impaired by the application of REVOFIX WET. natural fibres. The following applies for some
REVOFIX WET forms a film around the fibre dyeings/prints: A poor wet rubbing fastness strongly
preventing the color abrasion and at the same time tends to a wash-out effect, especially with multiple
reduces the fibre abrasion. This results in a perfect washings.
interplay of elasticity, adhesion and formation of a
gliding film. Recommendations for use
The product is applied with the exhaust process from
All of the amazing technologies are brought together a fresh bath after dyeing. Work at a liquor ratio of
with an excellent environmental compatibility. REVOFIX WET can be applied for the after-treatment 1:10 with 3.0 - 5.0 % REVOFIX WET. The optimal pH
REVOFIX WET reduces the colour abrasion from of dyeings and prints and is universally applicable value is between 5.0 and 5.5. The process is carried
dyed cellulose fibres, synthetics and their blends. - Fixing agent for dyeing cellulose fibres, synthetic out for 20 minutes at 40 °C.
The innovative fixing agent of the CHT Group fibres and their blends
increases the wet rubbing fastness of dyeing nearly - Wet rubbing fastness increases by up to 2 grades In the padding process we recommend a liquor
by up to two grades. It not only increases the fabric - For reactive, vat, sulphur, dispersion dyes and pick-up of 60 - 100 % at an application amount of 30
quality, but also the coolness of your customers. pigments
- Applicable by exhaust and continuous procedures - 60 g/l REVOFIX WET and a pH value of 5.0 - 5.5.
The right path to innovation For utmost dyeing processes we recommend the AD
Aside from the dye class and colour depth, the The environmental compatibility of REVOFIX WET is addition of the following products:
rubbing fastness also depends on the following self-speaking. The product fulfils the demands of
factors: Oeko-Tex® and ZDHC MRSL and is also bluesign® 1- REWIN ACP increases the washing and wet
- Substrate (polyester, cotton,....) approved. fastness properties on dyeings with reactive and
- Material structure (smooth fabric, knitwear,....) direct dyes on natural and regenerated cellulose
- Dyeing process Performance of REVOFIX WET: fibres. REWIN ACP meets the highest fastness
- Post-treatment While talking about the performance of the REVOFIX demands presently made on a cationic
- Finishing WET; With REVOFIX Wet, wet friction produces a after-treatment agent.
- Moisture when rubbing gliding film: after applying the product, the textile is 2- BEIZYM SPELL to avoid fibre abrasion. Cellulase
covered by a surface film which adheres to the textile mixture for bio-finish on CO and CV with magical
Examinations have shown that poor rubbing due to its specific product properties. The dry film is spectrum and with lint dispersing and hydrophilic
fastnesses are not only caused by abraded dye, but elastic and therefore gives the textile a mechanical effect.
also by abraded fibre material, especially from protection. Wet friction produces a gliding film that 3- COTOBLANC PCS removes non-fixed reactive dyes
natural fibres. reduces the friction between the textile and the from cellulose substrates. The product has the
friction body. While on the other hand Dye and fibre feature to hold back the hydrolysate in the bath and
The following applies for some dyeings/prints: A poor abrasion are greatly reduced by these specially to prevent its reabsorption. A special property of
wet rubbing fastness strongly tends to a wash-out designed product properties, dry and especially wet, COTOBLANC PCS is its efficiency also in the presence
effect, especially with multiple washings. thus improving the rubbing fastnesses. of electrolytes such as residual salt and alkali.
4- ARRISTAN 71 is a high-grade softener for an
REVOFIX WET is a revolutionary masterpiece for; According to the manufacturers the REVOFIX WET is excellent handle. The following properties stand out
- All major dye classes: reactive, sulphur, vat, the right path to innovation, side from the dye class for ARRISTAN 71:
Dark textiles on light coloured fabrics? Have dry rubbing fastness and especially the wet pigment dyes and colour depth, the rubbing fastness also depends - very soft, flowing handle with distinct surface slip
on the following factors:
- outstanding resistance to yellowing and therefore
your customers been sweating in the past? rubbing fastness on CEL and synthetic fibres. - On various fibre types - Substrate (polyester, cotton,....) particularly suited for ultra-white articles
Then REVOFIX WET brings a revolutionary REVOFIX WET is just what the world is - No impact on the other fastnesses and on the - Material structure (smooth fabric, knitwear,....) - improves the resilience of knitwear
effect: REVOFIX WET distinctly improves the waiting for since long. handle - Dyeing process - improves the sewability and thus further processing
- Hardly any impact on the shade The Swiss textile machinery industry opens up crucial competitive advantages
- Improves the wet rubbing fastness by up - Post-treatment of textiles for its customers with creative, economic and sustainable overall solutions – the
to 2 grades FACTOR :
Quality + Lasting Value
Strength + Partnership
Creativity + Success
High Tech + Reliability
Performance + Sustainability www.factor-plus.ch
November/December 2017